RingScan2D-B is a 2D ring barcode scanner with Bluetooth connectivity. It is a powerful new bar code scanner of the new generation with a small dimension and a charming look. The scanner supports both 1D and 2D barcodes. It is designed for data collection and sorting, enabling the operator to release his hand and increase operational efficiency.
Availability: Na dotaz
This type of scanner allows for efficient operations with the goods without the effort to handle. This type of scanner can increase productivity by 15% to 30%!
The scanner is designed to be comfortable to wear and use throughout the working day.
The robust rubber cover ensures that everyday use is reliable even under the toughest conditions.
The high-performance laser scanner allows you to recognize even damaged or badly printed codes. The Zebra SE2707 scan engine guarantees the best results and performance in scanning and data processing.
Bluetooth Super Class2 and 2.4G antenna transfer data up to 20m away. Optionally, it is possible to supply the RS232 and USB version for PC connection.
RingScan2D-B can easily connect to iOS or Android. Thanks to a specially designed Bluetooth protocol, it is possible to scan the barcode to iPad or iPhone directly without installing any software.
The scanner comes with an ergonomic hand-held smartphone holder for instant scanning of the scanned data.
|Specification||RingScan2D-B Wearable Ring 2D Scanner – wireless|
|Mechanical||Length:53.9mm, Width: 40.0mm, Height:50.3mm|
|Electrical Power:||DC5V Typical: 300mA DC5V|
|CPU||32bit ARM CPU|
|Data storage||100KB for offline mode: 6000 15 bytes barcodes(Other flash is optional).|
|Working mode||Bluetooth mode, USB mode, offline mode and RS232 mode(optional)|
|Scan mode||Manual mode, Continuous, Host, Sense mode|
|Ambient illumination||0～107,639 lux|
|Scanner performance||Sensor Type: 640 (horizontal) × 400 (vertical) pixels
Light: 610nm LED
660nm red LED
Scanner Angle: ±60°,±60°,±360°(skew, pitch, Roll)
Field of view: Horizontal: 42° , Vertical: 28°
|Scan engine||Zebra SE2707|
|Battery power||Internal Battery: Rechargeable 350mAh Li-ion Battery, Standby 5 days, working time after full charge with good decode as below:
Continuous trigger scanning interval Decoding number Working time
1S 8189 2.3hours
5S 4704 6.5hours
10S 3039 8.4hours
Charge time: About 1.5hours
|Barcode Type 1D||UPC-A, UPC-E, UPC-E1, EAN-8/JAN-8, EAN-13/JAN-13, Bookland EAN, ISSN EAN,
Code 128, GS1-128(formerly UCC/EAN-128), ISBT 128, Check ISBT Table, Code 128
Reduced Quiet Zone, Code 39, Trioptic Code 39, Convert Code 39 to Code 32, Code 32
Prefix, Code 39 Check Digit Verification, Code 39 Full ASCII, Code 39 Reduced Quiet
Zone, Code 93, Code 11, Interleaved 2 of 5, I 2 of 5 Readuced Quiet Zone, Discrete 2 of
5, Codabar(NW-7), CLSI Editing, NOTIS Editing, MSI, Chinese 2 of 5, Matrix 2 of 5,
GS1 DataBar-14, GS1 DataBar Limited, GS1 DataBar Expanded, Convert GS1 DataBar
to UPC/EAN/JAN, Composite CC-C, Composite CC-A/B, Composite TLC-39, GS1-128
Emulation Mode for UCC/EAN Composite Codes
|Barcode Type 2D||PDF417, MicroPDF417, Code 128 Emulation, Data Matrix, Maxicode, QR Code, Micro
QR, Aztec, HanXin, US Postnet, US Planet, UK Postal, Japan Postal, Australia Post,
Netherlands KIX Code, USPS 4CB/One Code/Intelligent Mail, UPU FICS Postal
|Decoding depth||51mm -162mm (5mil)|
|Battery||3000mah Rechargeable lithium ion battery external trigger mode work for 10 hours for 10 second interval scan|
|Communication||Android USB Accessory|
|Compatibility||Wireless version: android/IOS/WP/windows|