Protective film for 2.5" hard drive for installing the drive into the Addonics Snap-In bay or Disk Array
Standard height PCI bracket with eight 14 inch green LED cables installed
SCSI-1 (Centronics 50-pin) bracket with eight 14 inch green LED cables installed
40x40 mm cooling fan replacements for Addonics 2.5" Disk Array, model AE4RCS25NSA-A
80x80 mm. (8 x 8 cm.) cooling fan Addonics Disk Array AE5RCS35NSA and AE3RCS35NSA.
80 x 80 mm. cooling fan for all models of Storage Tower V, Storage Tower IX, RAID Tower V, RAID Tower IX and also HDD duplicators that uses the Storage V and Storage Tower IX chassis.
AAFANSD - 40 x 40 mm. fan mountable onto the front of any Diamond , Saturn or as a replacement fan for Sapphire or Z series Drive Enclosure. AAFANMR - 40 x40 mm cooling fan for the drive enclosure (AAHDSA35CS-R) of the
Green LED 5 mm with resistor, 14" cable
37 mm cooling fan. Replacement fan for Addonics host controller model ADSA3GPX8-4E and ADSA3GPX8-4EM.
The Addonics USIB connector converters instantly turn any IDE, SATA storage device into the Addonics USIB (Universal Serial Interface BUS) connection. With th
40 x 40 x 20 mm cooling fan for Addonics Storage Tower, model STMPC and STMPC-B
PCI converter bracket, used with SCSI-I (Centronics 50-pin) bracket